Network IP controller ZKTeco C3-100 for 1 door. The number of users is 30,000. The number of events in the memory is 100,000. Connection of 2 readers, inputs: 1 button, 1 reed switch, outputs: 1 relay for the lock, 1 additional relay for AUX output. Interfaces – RS485, Ethernet. The dimensions are 160x106 mm.
Features:
• Protection against high voltage, overloading, incorrect connection of ACS elements.
• Extensive opportunities for integration. The C3-100 can be easily integrated into security systems (video surveillance, fire and security alarm systems, building automation systems), as well as other systems to create a reliable and versatile security system.
• Support for various Wiegand readers. The controller supports various Wiegand interface formats, and can serve card readers of various formats: Em-Marine, Mifare, HID and others.
• Built-in relays for controlling executive devices (electronic locks, turnstiles). The possibility of connecting various sensors, alarms, exit buttons, reed switches.
• wide communication possibilities. Using the Ethernet network interface allows you to create a reliable transmission network.
• Use of browser technology. Easy management of the system using a browser - there is no need to install special software on all workstations.
• The possibility of setting the free pass mode after the first reading of the card.
• Monitoring of events in real time. The software allows you to receive all passage events in real time on a system-wide scale.
• Ease of configuration of the access control system.
• Interlock function. Combining a group of doors into a special logical sequence that allows you to open the second door only if the first door is closed.
• Card combination management. This function allows you to manage the visit of guests or specially protected objects. The door opens only if a certain combination of cards is presented in a row.
• Re-pass prohibition function. When it is necessary to have an exit record for re-access to the premises.
• Duress mode. Forced door locking.
• Free software SDK for integration with other software products.
Characteristics:
• Database of 30,000 RFID cards
• Event memory of 100,000 passes
• RS232/RS485, Ethernet interfaces
• Lock 1 (36 V 5A)
• Readers 2
• Exit button 1
• Reed switch 1
• Add. entrance 1
• Add. output 1 (2A/30V)
• Power supply 9.6-14.4 V DC
• Dimensions 160*106mm
Disconnecting the controller
• Ethernet - a network interface for communication with a PC.
• RS485 - network interface for communication with a PC (requires a converter).
• DIP switches for setting the address of the controller in the RS485 network, resetting the equipment to factory settings, connecting a 120 Ohm load resistor.
• Add. output - relay SPDT 2A@30V DC.
• Lock-relay SPDT 5A@36V DC or 8A@30V AC.
• Reed switch-door position sensor.
• Power supply-+12V DC.
• Exit button - request to exit (RTE) button.
• Reader-reader of contactless cards, Reader1-input, Reader2-output.
• SD card – expansion of the basic memory of the controller to store events.
Value of LED indicators
• LINK (green) – green is always on, indicating a TCP/IP link.
• ACT (yellow) – lights up when information is transmitted over the TCP/IP network.
• TX (yellow) – lights up when transmitting information over the RS485 network.
• RX (green) – lights up when receiving information via the RS485 network.
• Additional output (green) – always lit green if this output is used.
• Lock (green) – always lights up green if the lock is open.
• Power (red) – lights red when power is applied to the controller.
• RUN (green) - flashes periodically if the equipment is working normally.
• CARD (yellow) - flashes when the card is raised to the reader.
Recommendations for the use of wires
• For power, use a 2-core wire with a cross-section of at least 0.75 mm.
• For connecting contactless readers - a "twisted pair" type wire
• To connect the exit button and the device to complement. As an output, use SHVVP or PVS 2*0.5 mm.
• To connect the lock, use SHVVP or PVS 2*0.75 mm.
The C3-100 controller has no additional inputs.
The C3-200 controller has two, and the C3-400 has four additional inputs.
Additional inputs are used to connect gas, smoke, fire detectors, infrared sensors, security sensors, etc.
Additional inputs are programmable using software.
