Electromechanical lock YLI YB-600A(LED) mortise bolt with cylinder for access control systems, normally open (NO). Built-in door closing delay timer: 0, 3, 6 and 9 seconds, LED backlight and door status sensor. The maximum trigger distance is 8 mm. Operating current: 1200mA, in standby mode: 200mA. 12V power supply. Dimensions 260x30x48mm.
Electric deadbolt lock is a device for remote door locking, the door is locked by a retractable deadbolt (metal rod) that is included in the response part.
When the door is closed, the reed switch built into the lock reacts to the magnet in the bar in response, and closes the contact of the solenoid, which extends the bolt.
In the event of a power outage, the lock is in the open state (bolt pushed in), which complies with fire safety regulations.
The lock is opened by the control contact (orange wire).
The lock is used in automated access control and management systems (ACMS) in offices, business centers, shops and other premises.
Characteristics:
• Light indication
• The type of device is an electric deadbolt lock
• Operating temperature, °C -40 ~ +60
• Position on the door is universal
• The possibility of opening with a key is
• There is a delay timer
• Open without food
• Material is steel
• The installation type is recessed
• Current consumption, ma 1200 (1.2 A)
• Supply voltage / DC 12 V power source
• Weight, m 1600
• Dimensions:
- Lock: 270x30x48 (mm)
- bar in response: 100x25x3 mm
- bolt: diameter 16 mm, length 13 mm (straight)
Complete set:
• electric bolt lock
• overlay on the lock
• plank in response
• cylinder, 5 keys
• installation kit
• mounting pads for a hollow metal box
• instruction
Installation:
• Cut out a niche in the door frame/door to the size of the lock and the corresponding bar, then install the lock flush with the surface
• To install the lock in an empty metal door frame, use the special mounting pads from the kit
• Place the pad on the lock and fix with screws
• Install the bar in response so that the built-in magnet (plastic circle) is below the bolt of the lock. The distance between the lock and the bar in response should be no more than 8 mm
• According to the connection instructions, connect the electric deadbolt lock YB-600A(LED) to the power and control devices of the access control system
COMPATIBILITY
The YB-600A(LED) electric deadbolt lock is compatible with code keypads, readers, radio controllers, exit buttons, audio and video intercoms of all types or other access control system devices.