TRX-PRO radio sensor and key fob receiver for OKO-U2, OKO-PRO, DIM-3, OKO-7S.
Characteristics:
• The number of radio sensors/fobs is 16
• Number of Expert 4 radio sockets
• Type of pluggable OKO sensors at 433 MHz
• Number of relay outputs –
• There is no siren output
• Frequency, modulation, coding 433 MHz, ASK, PowerCode
• Distance of wireless communication up to 50 m
• Operating temperature range from -10°С to +50°С
• Overall dimensions 40x20x20 mm
The board is designed to receive signals from OKO wireless sensors and key fobs and issue alarm and control signals on OKO-U2, OKO-PRO, ДИМ-3 GSM alarms.
It is also possible to control up to 4 Expert type radio sockets and use a radio siren. Simultaneously with the ON/OFF of user outputs-1..-4, the corresponding Expert radio sockets will be turned on.
To use the optional TRX-PRO receiver-transmitter in the OKO-PRO and DIM-3 alarms, it must be connected to the X16 connector, and for the OKO-U2 alarm, it must be connected to the XS2 connector.
In order to include OKO-U2, OKO-PRO, ДІМ-3 wireless OKO sensors/fobs, the alarm must be switched to programming mode. Wireless EYE sensors/key fobs are introduced by triggering them sequentially, for example, insert batteries into the sensor, open the sensor, remove or bring the magnet to the opening sensor, press the red button on the key fob, etc. At the same time, there will be a short signal of the LED and Siren, confirming it, as well as a long flash of the LED on the receiver board. Next, it is necessary to trigger the next sensor/fob, etc. A total of 16 different sensors and key fobs can be entered into the alarm memory. If you try to enter more than 16 different sensors into the alarm memory, the previously entered sensors will be overwritten in a circle. By default, the Expert radio socket code is "00000", it can be changed by "Configurator".
