Telephone cable Odesa cable TPPeP 20x2x0.5 (TППеП 20х2х0.5)

Telephone cable TPPEP 20x2x0.5 (TППеП 20х2х0.5) with solid polyethylene insulation of the cores, with a screen made of aluminum-polymer tape, in a polyethylene sheath. Conductive core - made of soft copper round wire. Insulation - in cables of the TPPEp brand - solid polyethylene. Belt insulation - polyamide, polyethylene, polyvinyl chloride or polyethylene terephthalate tapes. Screen - aluminum-polymer tape, a tinned copper contact wire is laid under the screen. Sheath - made of polyethylene. Application - intended for operation in local primary communication networks with a rated remote power supply voltage of up to 225 or 145 V alternating current with a frequency of 50 Hz or voltage up to 315 and 200 V direct current, respectively.

Characteristics:
• Climatic performance of the telephone cable TPPeP 20x2x0.5: UHL, first and second placement categories according to GOST 15150-69.
• Minimum operating temperature of the telephone cable TPPep 20x2x0.5: -50 degrees.
• Maximum operating temperature +60 degrees.
• Air humidity during operation of the TPPep 20x2x0.5 telephone cable must exceed 98%.
• Installation of the telephone cable TPPeP 10x2x0.5 is carried out at a temperature not lower than -15 degrees.
• The tensile force when laying a telephone cable TPPep 20x2x0.5 should not exceed 500 TPPep 20x2x0.5: 123 millimeters.
• Estimated mass of the TPPeP 20x2x0.5 cable: 0.179 kilograms per meter.
• Outer diameter of TPPEP 20x2x0.5: 14 millimeters.
• The service life of the telephone cable TPPeP 20x2x0.5 is at least 20 years.