The Tiras PRIME 16 fire alarm device receives and controls the basic 16 alarm zones; 6 outputs (2 relays, 2 alerts, 1 malfunction, 1 fire) - connection of two M-OUT8R expansion modules via the RS-485 system bus and an M-OUT4R expansion module installed on the control panel base board - setting up systems with the "tLoader" software (Windows/Android), built-in mini-USB interface – connecting M-GSM or M-PSTN communicator – fire safety automation scenarios – non-volatile log for 1000 events; - Placement in an ergonomic plastic case with a built-in 50W power supply unit and space for two 7 or 9Ah batteries.
Features:
• 16 fire alarm zones;
• Three types of operation verification;
• 2 programmable relay outputs;
• Controlled outputs "Fire", "Fault".
Ergonomic body
• New plastic case, has optimal dimensions and construction. The case provides quick and convenient installation.
User interface
• Intuitive interface using mnemonics, informer and single-level control system.
Power supply
• Operating voltage: 24 V;
• Backup power supply: 2 batteries for 7 or 9 Ah;
• Impulse power supply unit with a capacity of 50 W;
• Intelligent charger;
• Ground control.
Two notification outputs
• The possibility of zoning the notification to improve the topology of the system and save cable products.
Programming
• The possibility of programming from a personal computer or smartphone/tablet while using the "tLoader" software. The devices are equipped with a USB interface.
System bus
• Availability of an RS-485 bus for connecting additional equipment. Assigning devices through a unique serial number without the use of jumpers and DIP switches.
Work with PCN
• Two communicators:
-M-GSM - communication with the police station via GPRS with the possibility of using two SIM cards;
-M-PSTN – communication with the PSTN via telephone line.
• Automation scenarios
The ability to perform both simple automation functions and complex dependencies with delays using a special script system.
Additionally
• Journal for 1024 events;
• Built-in relay outputs;
• Names of all system components;
• Additional operating modes of zones;
• SMS messages.
Characteristics:
• Zones
- number of zones: 16;
- voltage in the zone: 24 V (Nominal);
- number of detectors in the zone: no more than 32;
- resistance of the final resistor: 6.8 kΩ or 3.9 kΩ;
- resistance of additional resistor (for 2-wire circuit): 1 kΩ;
- Resistance of the shunt resistor (for 4-wire circuit): not supported.
• Interfaces for connecting external devices, keyboard
- communication bus (quantity, type): RS-485, 1 bus;
- the maximum length of the communication bus: 1000 m.
• Exits/entrances
- 2 "announcement" outputs;
- 2 programmable relay outputs;
-Fire and Malfunction outputs.
• Communication parameters with the PCN
- communication channels - GSM (GPRS only), telephone line;
- work protocols (work modes) - ContаstID (telephone line), MOST (GSM);
- Built-in GSM module-No.
• Management, control, expansion, programming, software
- tLoader / Operating system - Windows XP / 7/8/10, Android (with OTG).
• Zone expansion modules, exits
- Modules-M-OUT4R, M-OUT4Rbox, M-OUT8R;
- Max. Quantity: M-OUT4R – 1, M-OUT4Rbox – 2, M-OUT8R – 2.
• Power supply
- main power supply and current: 220 V (-15% + 10%), 50 ± 1 Hz, 0.27 A;
- Maximum load current of device outputs (for external devices): 2x24 V x400 mA;
- maximum alarm output current: 2x3A (switching);
- Backup power: Type / capacity -2 lead-acid batteries 7 A * h, 12 V or 9 A * h, 12 V;
- Minimum current from the battery: 80 mA.
• General characteristics
- Operating temperature range: -5 ° C to + 40 ° C;
- overall dimensions: 349x367x96 mm;
- Weight: 4 kg (without battery);
- body material: plastic;
- Degree of protection of the housing: IR30;
- The term of service is at least 10 years.
• Specific device data:
- Type A, B and C verifications in zones (according to EN54-2);
- event log for 1024 entries;
- real time clock;
- "Day-Night" mode
- output scenarios;
- USB connection;
- SMS messages;
- intelligent charger;
- Powerful pulse power source.
