SFP media converter Step4Net MC-A-0,1-1SM-1310nm-20 10/100Mbit, metal case, external power supply unit for operation on one SM fiber, transmission wavelength 1310, distance 20 km SC/PC, external PSU. Pair - MC-A-0,1-1SM-1550nm-20, chipset 175.
Step4Net media converters are designed to convert the signal from the 10BASE-T /100BASE-TX Fast Ethernet standard on twisted pair to the signal of the 100BASE-FX Fast Ethernet standard over single-mode optical fiber.
Supporting WDM technology, Step4Net media converters allow simultaneous transmission and reception of signals at wavelengths of 1310 nm and 1550 nm along one optical fiber at a distance of up to 20 km.
Each media converter is equipped with 1 RJ-45 port for twisted pair and 1 port for optical cable (SC-connector) and can be used as a separate device or installed in a universal 14-slot chassis for media converters - FoxGate EC-F14 and Step4Net MCF
The device is equipped with an IP175 intelligent chipset. The devices are equipped with an external power supply unit 100-240, 50 Hz.
Features:
• IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX/FX, IEEE 802.3ab, IEEE 802.3E
• Indicators: FEF, FXL, PWR, TXL, SPD, FDX.
• Autodetection for Ethernet: 10/100 Mbit, Full/Half Duplex.
• Dimensions 94×70×26 mm.
• Ambient temperature during operation: 0~70 °C.
• Ambient temperature during storage: - 40-85 °C.
• Humidity: from 10 to 90% without condensation.
• Power supply: 5V 1A, external power adapter
There are connectors and indicators on the front panel:
SC/PC type optical connector;
RJ-45 connector for connecting to Ethernet 10/100BASE-TX devices.
In addition, there are LED indicators on the front panel that inform about the presence of power, as well as the transmission speed and the status of the network and optical interfaces.
There is a power connector on the back panel.