Cart 0
Compare 0 Wishlist 0
My Account
Menu
Our address: 02096, Ukraine, Kyiv, Simferopolska Str, 13a mail@elvis.com.ua
02096, Ukraine, Kyiv, Simferopolska Str, 13a mail@elvis.com.ua
Monday - Friday from 9.30 to 18.00
Saturday, Sunday weekend
Consulting, receiving orders by phone
and e-mail - a week from 9.30 to 20.00
420.00грн.

Controlled radio socket SOKOL F-10

Brand: GEOS
Product Code: 03171
Reviews: (0)
Archive product
420.00грн.
Price with VAT: 420.00грн.
Fast delivery Nova Post across Ukraine; Free shipping from UAH 2,000; Pickup Simple payment Payment on account - for individuals; Non-cash payment wit VAT - for companies Warranty Warranty for purchased goods Exchange and return Exchange and return of goods within 14 days
Controlled radio socket SOKOL F-10 for switching devices in a 220 V network using a radio key fob, distance up to 50 m.

The radio socket is used for remote control of lighting, watering, heating devices or household appliances. Easy to set up and operate. Convenient and clear connection. Keychain with battery included.

Discontinued.

Replacement of SOKOL F-30.

Features:
• Connection to 10 key fobs or to a radio outlet
• One mode of operation
• Simple Setup
• Mode selection from the key fob
• Does not require a separate power source
• Comfortable and practical design

Features:
• Supply voltage 180-240 V
• Maximum consumption 50 mA
• Maximum load power 1.8 kW (16 A);
• Does not require a separate power source
• Communication standard: 433.92 MHz, PV1527
• The maximum number of keychains is 10
• Operating range, no more than 50 m (indoors - 30 m)
• The maximum time of the timer is 65000 seconds
• LED indication: yes
• Protection against incorrect connection: yes
• Load protection: yes
• Temperature range: from -10 to +55 C
• Mode of operation: long-term
• Weight: 0.2 kg

Kit:
• Controlled radio outlet
• Keychain with battery
• Instructions

Settings
• First power-on. When first connected, the device emits two short flashes of the LED, which
means that there are no attached fobs. If one signal is given, at least one key fob is attached to the device.

• Adding keychains. To add the key fob to the device's memory, you need to press
button on the side panel of the socket (INSTALLATION button) briefly. After that it is necessary
press the buttons on the key fob in turn. The following pressing sequence should be followed:
1- DISABLE button; 2- button ENABLE; 3- TIMER button; 4- SAVE button.
At the same time, the device will emit one light signal when adding each new button
keychains If the button is already in the device's memory, two short light signals will be given.
It is recommended to press each key several times before adding the next button.
After adding the SAVE key fob button, you should press the INSTALL button
saving settings. In order not to save the settings, wait 10 seconds, the device will enter the mode
standby and current setting will not be saved.

• Removal of key chains. To delete all key fob codes from the device's memory, you must remove them
power from the device for 10 seconds. After that, you need to press the INSTALLATION button, and while holding it,
apply power to the device. After 5, the outlet will give 5 short light signals, which means
deleting all key fob codes.

• Selection of the operating mode. The device supports three operating modes. All of them are available for selection
from the keychain To select the operating mode, press the corresponding key fob.

• Modes of operation.
- Mode with saving – when you press the SAVE button, the state of the relay will be saved. At
when the power is turned off, the outlet remembers its state. When the power is restored - the outlet
will return to the saved state. DISABLE key - turns off the power supply of the load; The ON key turns on the power; The TIMER key is active only after the power is turned off
load.
- Impulse mode – when the ON button is pressed, the relay closes (turns on the power).
DISCONNECT key - opens the relay (turns off the power).
- Timer mode – when the TIMER key fob key is pressed – the load is powered on
set time (factory setting 6 s). The time can be set from 1 to 65,000 s. Key
OFF - turns off the power, ends the timer. ON key and key
SAVE - not active.

Setting the timer time. To set the time for which the load will be powered,
it is necessary to supply power to the device and add at least one key fob. Then click
hold the button for more than 5 seconds. The outlet will go into programming mode. The LED is flashing
once per second. After counting the required time, you need to press any button on the key fob to
the device has memorized the set time.
Product type
Controlled radio outlet
Reviews
0/ 5
average product rating
0
0
0
0
0
There are no reviews for this product. Be the first to leave your review.