Motion detector Satel AOD-210, wireless combined - infrared and microwave

Name: Motion detector Satel AOD-210, wireless combined - infrared and microwave
Brand: Satel
SKU: 05959
Price: 4204 UAH
Availability: InStock

Free delivery

Brand: Satel

Product Code: 05959

Reviews: (0)

In Stock

4 204.00грн.

Price with VAT: 4 204.00грн.

Discounts and wholesale prices

Fast delivery Nova Post across Ukraine; Free shipping from UAH 2,000; Pickup Simple payment Payment on account - for individuals; Non-cash payment wit VAT - for companies Warranty Warranty for purchased goods Exchange and return Exchange and return of goods within 14 days

Satel AOD-210 motion sensor wireless combined digital: infrared and microwave, outdoor, IP54, white.

The AOD-210 sensor is intended for operation in a wireless system with two-way communication ABAX 2/ABAX - both inside and outside protected premises with specific conditions (for example, pavilions). The detector meets the requirements of the European standard EN 50131 Grade 2 (in the case of indoor use).

The body of the device is made of polycarbonate (IP54 degree of protection) and can be fitted with a HOOD C (white) or HOOD C GY (grey) protective visor. The design of the AOD-210 detector allows you to install it directly on a flat surface. If the detector is to be installed at an angle vertically or horizontally, special brackets - angular or spherical - from the set BRACKET E or BRACKET C (white) or BRACKET C GY (gray) should be used.

To increase the distance from the detector to the wall by 10-20 cm, you should use the BRACKET E modular bracket. This will avoid limiting the detection zone of the detector by cornices, external blinds, a tube with cables, a lamp, a pipe or unevenness of the wall.

The detector has tamper protection against opening and separation from the mounting surface.

It is powered by a CR123A 3B lithium battery. It is characterized by low energy consumption, and the "ECO" option (only ABAX 2) allows you to extend the battery life up to four times.

AOD-210 is available in two versions: white (AOD-210) and gray (AOD-210 GY).

features:

• compliance with the requirements of the EN 50131 Grade 2 standard (in the case of indoor use)

• two detection channels: IR (dual pyroelement) and microwave

• protected area: 16 m x 16 m, angle 90°

• high resistance to false alarms

• advanced digital signal processing

• dynamic compensation of temperature changes

• control of the approach zone to the detector

• built-in light sensor

• remote configuration and firmware update

• work with:

- ABAX 2 system controllers (ACU-220 and ACU-280), as well as ARU-200 repeater

- ABAX system controllers (ACU-120, ACU-270 and earlier ACU-100, ACU-250), INTEGRA 128-WRL device and ARU-100 repeater

• range of radio communication in open space:

- in the ABAX 2 system: up to 2000 m (with ACU-220) / up to 1600 m (with ACU-280)

- in the ABAX system: up to 500 m

• built-in temperature sensor (temperature measurement from -40°C to +55°C)

• independent adjustment of the sensitivity of the IR and microwave channels and the illumination sensor

• three LEDs for signaling a violation in test mode

• immunity to animals (up to 20 kg)

• splash-proof polycarbonate housing resistant to changing atmospheric conditions with IP54 degree of protection

• low power consumption and battery health monitoring

• "ECO" option, which allows you to extend the operating time of the device from the battery (only in ABAX 2)

• power supply: CR123A 3V battery

• installation directly on a flat surface or when using:

- special brackets from the BRACKET C kit

- Corner bracket: constant angle of 45 °

-- bracket with ball support with adjustment range: up to 60° vertically and up to 90° horizontally

- special brackets from the BRACKET E set:

-- BRACKET E-1 (GY) – housing for mounting BRACKET E-2B

-- BRACKET E-2B (GY) fastening element for street detectors AOD-210

-- BRACKET E-3 (GY) – gap element (height 30 mm)

-- BRACKET E-4 (GY) – base (height 20 mm)

-- BRACKET E-5 (GY) – bracket with ball support for street detectors of the OPAL series: range 60°

-- BRACKET E-6 – sabotage element (1 NO/NC switch, cable length 50 cm)

• tamper protection against opening and separation from the mounting surface

• the possibility of installing a HOOD C protective visor

Features:

• Battery life (years) up to 2

• Detected movement speed 0.3...3 m/s

• Operating temperature range -40°C...+55°C

• The recommended mounting height is 2.4 m

• Maximum current consumption 30 mA

• Weight 182 g

• Maximum air humidity 93±3%

• Band of operating frequencies of 868.0 MHz

• CR123A 3V battery

• Current consumption in standby mode is 75 μA

• Overall dimensions 65 x 138 x 58 mm

• Environmental class according to the EN50130-5 IIIa standard

• Compliance with standards EN50131-1, EN50130-4, EN50130-5

• Accuracy of temperature measurement ±1°C

• Microwave frequency 24.125 GHz

• Safety class according to the EN50131-2-4 Grade 2 standard

• Start-up time 40 s

• Degree of protection of the shell IP54

• Range (in line of sight) for ACU-270 up to 500

• Range of action (in line of sight) for ACU-220 up to 2000

• Range (line of sight) for ACU-280 up to 1,600

• Temperature change in the range of -40°C...+55°C

• Area zone 16 m x 16 m, 90°

Product type

Infrared and microwave detector

Warranty period

12 months

Length

6.50cm

Width

13.80cm

Height

5.80cm

Weight

0.18kg

Reviews

0/ 5

average product rating

There are no reviews for this product. Be the first to leave your review.