Wireless controller Satel ACU-220 for INTEGRA, VERSA, 2 antennas, up to 2000 m.
ABAX 2 wireless system controller.
The ACU-220 controller uses 868 MHz communication and four separate channels. Two-way communication between ABAX 2 system devices is encrypted (AES standard) and all signals are confirmed. The controller works with INTEGRA, INTEGRA Plus and VERSA series devices (connection to the communication bus), allowing you to expand the system with wireless devices. ACU-220 can also be connected to third-party devices using programmable inputs and outputs of the module.
ACU-220 complies with the high requirements of the European standard Grade 2 EN 50131.
Its advantage is an excellent radio communication range, which is even up to 2000 m in open space, depending on the device and working conditions. This result was achieved by the use of a new radio system and two antennas used to send signals depending on the quality of the connection.
To configure the system, you can use the ABAX 2 Soft software installed on your computer, which also offers advanced diagnostic tools. When working with INTEGRA, INTEGRA Plus and VERSA devices, the DLOADX software or the keyboard is used for configuration. Changing the settings, as well as updating the firmware, is carried out remotely.
Peculiarities:
• illumination of keys and display
• compatible with EN 50131 Grade 2
• two-way communication 868 MHz - 4 channels
• range up to 2000 m in open space
• support for up to 48 wireless devices
• support for wireless keyboards: up to 4 INT-KWRL2, up to 6 VERSA-KWRL2
• support for up to 256 APT-200 keyfobs
• work with INTEGRA, INTEGRA Plus and VERSA series devices – connection to the communication bus
• autonomous operation or with third-party devices
- 8 programmable outputs
- 4 programmable inputs
• 4 outputs for signaling the status of the controller and wireless devices connected to it
• Antenna Polarization Diversity
• setting:
- device service menu or DLOADX software – in case of working with INTEGRA, INTEGRA Plus or VERSA series devices
- ABAX 2 Soft software - in the case of a controller operating in the mode of a universal module of wireless devices (standalone or with third-party devices)
• remote firmware update
• remote configuration and updating of devices registered in the controller
• tamper protection
• power supply: 12 V DC
Characteristics:
• Supply voltage (±15%) 12 V DC
• Housing dimensions 126 x 158 x 32 mm
• Overall dimensions of the electronics board 103 x 139 mm
• Operating temperature range -10°C...+55°C
• Current consumption in standby mode 75 mA
• Maximum current consumption 100 mA
• Weight 222 g
• Maximum air humidity 93±3%
• Operating frequency band 868.0 MHz
• Range (line of sight) up to 2000 m
• Environmental class according to EN50130-5 II
• Compliance with standards EN 50130-4, EN 50130-5, EN 50131-1, EN 50131-3, EN 50131-5-3
• Safety class according to EN50131-3 Grade 2
• Output type OC 50 mA / 12 V DC
