Tiras PRIME S fire alarm device, 4 alarm zones, up to 32 detectors per zone

Tiras PRIME S fire control and monitoring device; 4 alarm zones, up to 32 detectors per zone; expansion capability: up to 2 devices in the control panel slots and up to 4 devices on the RS485 bus; 2 relay outputs; power supply: main 220 V, built-in 35 W power supply, controlled 24 V power outputs, backup power supply using 1 battery with a capacity of 7 or 9 A·h - lead-acid or LiFePO4, purchased separately; communication: Ethernet via the M-NET+ module, Wi-Fi via the M-WiFi module), 2G/4G via the M-2G/M-LTE module - modules purchased separately; USB Type-C interface; dimensions 280 / 280 / 80 mm, weight 1.25 kg.

Application
Tiras PRIME S is used to organize a fire alarm system in the smallest facilities - shops, pharmacies, cafes - where it is necessary to ensure effective monitoring and control of the state of the fire safety system. The control panel controls the detectors, the notification system and the connection of external devices, and also ensures the transmission of messages about danger or malfunctions to indicators and alarm message transmission systems.

Obstacles:
• 4 fire alarm zones, with a maximum of 32 detectors per zone. Allows you to configure verification in each zone for improved threat detection accuracy.
• Support for system expansion by connecting additional devices:
- to slots on the control panel board: communicator – 1 or 2 pcs. (simultaneously: M-2G or M-LTE, M-WiFi or M-NET+), M-OUT2R – 1 or 2 pcs.;
- on the RS485 system bus – up to 4 devices simultaneously: M-OUT8R or M-OUT2R box – 4 pcs., PUiZ – 4 pcs.
• Two alarm outputs, allowing you to configure different operating modes for each output with status monitoring and settings.
• Fire and Fault outputs.
• Ability to configure zones as universal inputs for connecting various devices.
• Day-Night mode for delay and alert control.
• Convenient setup and monitoring via USB-C port.
• Non-volatile clock and event log for 1000 records.
• Main power supply 220 V. Two controlled power outputs 24 V. Backup power supply using one battery with a capacity of 7 or 9 A·h, the ability to operate from lead-acid or LiFePO4 batteries - the battery is purchased separately. Charger with control of the battery type and capacity.
• Determining the level of contamination of the smoke detector chamber or detecting a malfunction of the heat sensor of connected DETECTO series detectors.
• Possibility of a test fire.
• Tamper protection against opening.
• The control panel complies with the mandatory requirements of DSTU EN54-2, contains integrated power supply equipment that complies with the requirements of DSTU EN54-4. With the communicator installed (M-2G, M-LTE, M-WiFi), the control panel complies with the requirements of DSTU EN54-21.

Characteristics:
• Device type: control panel
• Dimensions 280 / 280 / 80 mm
• Weight 1250 g
• Working temperature -5 °С +40 °С
• Body material Plastic
• Power supply 220 V
• Number of outputs 2
• Current consumption 1.3 A
• Country of origin of the product Ukraine
• Tiras PRIME series
• Number of zones/groups 4
• Protection class IP30