Atcom HDMI - RJ-45 (F/F) extender, up to 120 m, Black (14157)

HDMI twisted pair extender is used to connect a computer, player or other device that controls the output device. This extender allows you to transmit the signal without loss of quality over a distance of up to 120 m.

The HDMI extender consists of two blocks - TX and RX. To connect the blocks to each other, you need to use a shielded twisted pair cable CAT-5e/6 straight crimp (both sides the same) with shielded RJ45 connectors. To connect the twisted pair cable, two RJ45 connectors are provided on the side of the blocks (the connectors are labeled with the numbers "1" and "2"). These connectors are designed for signal transmission and for the exchange of "service" data between devices.
One unit (TX - TRANSMITTER) is installed near the control device. Accordingly, the second unit (RX - RECEIVER) is installed near the output device.
To connect to the corresponding devices, it is equipped with an HDMI ("female") type "A" connector, meaning that you will need additional HDMI-HDMI male-male cables to connect.
This HDMI extender requires additional power to operate; 2 power supplies are included, one for each unit.
Possibility of several connection schemes - see photo instructions.

Features:
• resolution support: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p (50/60 Hz);
• bandwidth: 165MHz;
• maximum data transfer rate: 4.95 Gbit/s (1.65 Gbit/s for each channel);
• supported color depth: 8 bits/channel (24 bits for all channels);
• support for HDCP technology;
• audio support: LPCM, DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD);
• maximum data transmission distance: up to 120 m;
• cable used for signal transmission: copper twisted pair CAT-5e/6 straight crimp (same on both sides) with shielded RJ45 connectors;
• connectors: HDMI female, LAN 8P8C;
• case material: metal;
• color black;
• additional power supply: 5V, 1A, 2 power supplies included

• Width, mm 130.00
• Height, mm 80.00
• Depth, mm 190.00
• Weight, kg 0.40