OKO-S2 GSM alarm device (board) for remote control, management and notification of the state of a stationary object (apartment, cottage, garage, etc.) using a mobile phone or computer using a cellular network.
GSM alarm is a microcomputer with a built-in GSM module to which sensors, a siren and other external devices are connected.
Opportunities:
• Alarm input – 1 pc.
• Arming/disarming input – 1 pc.
• Output LED or USER - 1 pc.
• SIREN or USER output - 1 pc.
• Number of users – 8 pcs.
• Arming/disarming: by DTMF command, SMS command, call upon entry
• Delay in arming
• Alarm delay
• Alerts during an alarm: calls, SMS to all users
• Notification when 220V is turned on/off: SMS to user-1
• Notification when security is turned on/off: SMS to user-1
• SMS report on the status of the device
• Configuration via SMS commands
Characteristics:
• Number of leading zones 1
• Number of thermal sensors –
• Number of radio zones with radio frequency -
• There is an arming/disarming input
• The type of sensors that can be connected are contact
• Number of user exits 2 (changeable)
• Siren output is (variable)
• Output LED is (variable)
• Number of users 8
• The method of setting the security input / call / DTMF / SMS
• Call/voice/SMS notification method
• GPRS/EDGE data transfer method
• How to configure SMS
• Saving device settings
• There is no memory map
• Software updates by the user are
• Supply voltage +10 V...+15 V
• Standby current consumption up to 50 mA
• Current consumption when connected up to 200 mA
• There is no battery charge controller
• There is no current consumption when charging the battery
• Operating temperature range from -30°С to +80°С
• Automatic shutdown of the GSM module below -40 °C, above +85 °C
• Operating frequency range 850/900/1800/1900 MHz
• Overall dimensions 50x40x12 mm