Motion detector KS101 security infrared

Motion detector KS101 security infrared passive for alarm, indoor installation, range 15-18 m, angle 90°, microprocessor signal processing, DC 12V.

Discontinued.

Characteristics:
• Target speed range: 0.3...3.0 m/sec
• Supply voltage: 8.5 .... 16 V
• The sensor is insensitive to power supply voltage drops for a time of up to: 250 msec
• Current consumption (at 12 V), no more than:
- in standby mode 8 mA
• In alarm mode:
- with LED on 18 mA
- with LED off 6 mA
• Alarm notification time 3 sec.
• Maximum detection range:
- with a 12-15 m volumetric lens
- with a lens corridor 30 m
- with 15 m curtain lens
• Relay output: 60 V, 100 mA
• Protective resistance in the relay circuit: 10 Ohm
• Technical readiness time: 30 sec.
• Time to restore to standby mode after issuing an alarm notification: 1 sec.
• Protection against white light, at least: 6500 Lux
• Operating temperature range: -10 0С...+50 0С
• Resistance to electromagnetic interference: 5 V/m
• Resistance to electrostatic discharge: 8kV
• Dimensions: 97mm x 60mm x 46mm
• Weight: 75 grams

Features:
• Digital processing algorithm
• Counter of different polarity pulses
• Four sensitivity levels
• Detection range adjustment by tilting the board
• Isolated pyroelectric detector
• Wide viewing angle of the LED
• Relay – optoelectronic switch
• Wide supply voltage range
• Self-diagnosis – monitoring of the main circuits of the detector
• Low temperature operating mode
• Automatic temperature compensation
• High resistance to radio frequency electromagnetic interference and electrostatic discharge