Cable twisted pair patch cord OK-Net KGPVE-VP (100) 4x2x0.48 305m (7932026m305) F/UTP-cat.5E-SL patch AWG26.
Patch cable OK-Net OK-Net KGPVE-VP (100) (F/UTP-cat.5E-SL patch AWG26) - twisted pair FTP with a protective screen. Belongs to category 5e, supports the operation of network devices up to 100 MHz, is used for building local networks and for laying telephone lines, and also supports data transfer rates up to 100 Mbit/s when using 2 pairs.
It is shipped in bays of 305 m.
Application
• PBX, V.11, X.21, ISDN, Ethernet (10Base-T),
• ATM-25/52/155Mbps, 100VG-AnyLAN, Fast Ethernet (100BASE-TX),
• Token Ring 16/100 Mbit/s, Firewire 100 Mbit/s, Gigabit Ethernet (1000BASE-T)
Construction
• Conductive core: soft copper wire.
• Diameter: 0.48 mm
• Insulation: polyethylene
• Pair: 2 conductors twisted together
• Color identification of veins:
- pair 1: white-blue/blue
- pair 2: white-yellow-hot / orange
- pair 3: white-green/green
- pair 4: white-brown/brown
• Core: 4 pairs twisted together with a cord
• Foil screen
• Outer shell: polyvinyl chloride plastic (PVC) or LS0H-compound.
• Shell color: white (PVC), orange or blue (LS0H)
• Maximum cable diameter: 6.9 mm.
Characteristics
• Type FTP RJ45 cat. 5e
• The length of the cable is 305 m
• The number of veins is 8
• Section 0.48 mm
• Quantity in a box 1 pc
• Package size (W x H x D) 200 x 380 x 380 mm
• Gross weight 11.0 kg
• Mechanical characteristics:
- Temperature range:
-- During installation -10 °C...+60 °C
-- After installation -20 °C...+60 °C
- Bend radius:
-- During installation ≥ 8 x cable diameters
-- After installation ≥ 4 x cable diameters
- Tensile strength ≤ 85 N.
• Electrical characteristics at 20°C
- DC resistance ≤ 96 Ohm/km
- Insulation resistance ≥ 5 GΩ/km
- Working capacity ≤ 56 pF/m
- Signal propagation speed ≥ 0.68 s
- Signal propagation delay ≤ 534+36/√f ns/100 m
- Frequency delay offset: 100 MHz ≤ 45 ns/100 m
- Wave resistance in the frequency range: 1-100 MHz 100±10 Ohms
- Screen attenuation in the frequency range: 30-100 MHz ≤ 40 dB
- Test voltage between cores, cores and screen (direct current, 2 s) 2.5 kV
- Operating voltage (DC) 72 V
Compliance with F/UTP requirements for indoor routing
• Cable requirements: DSTU IEC 61156-5, DSTU EN 50288-3-1, TU U 27.3-05758730-100:2018
• Requirements for cable wiring: DSTU ISO/IEC 11801, DSTU EN 50173-1
• Fire Security:
- PVC: DSTU 4809:2017 (clause 5.1), DSTU EN 60332-1-2
- LSZH: DSTU 4809:2017 (clauses 5.1, 5.3-5.5), DSTU EN 60332-1-2, DSTU EN 60754-1, DSTU EN 60754-2, DSTU EN 61034-2
- LSFRZH: DSTU 4809:2017 (clauses 5.1-5.5), DSTU EN 60332-1-2, DSTU EN 60332-3, DSTU EN 60754-1, DSTU EN 60754-2, DSTU EN 61034
