Fire-resistant power cable TCF (N)HXH FE180/E90 3x1.5 0.66/1kV

Power cable TCF (N)HXH FE180/E90 3x1.5 0.66/1kV; fire-resistant halogen-free, does not spread / does not support combustion, with preservation of cable functions under fire conditions for 90 minutes; unshielded; 3 cores with a cross section of 1.5 mm2; for electrical networks with a nominal voltage of up to 0.66/1 kV; conductor material is copper; outer sheath is halogen-free compound.

Application
It is used for permanent laying above and below plaster in dry, damp and wet rooms, as well as in masonry, walls and concrete. The cable can be laid in the ground, but only if it is laid in protective hoses and pipes. Suitable for electrical networks with a nominal voltage of up to 0.66/1 kV.

Key properties
• Complies with standards: fire resistance DIN VDE 0472-804C, 0482-266-2-4, IEC 60332-3; smoke emission DIN VDE 0472-816, 0482-267-2-4, IEC 61034; toxic and corrosive gases during combustion: IEC 60754-1, acid gases < 0.5% DIN VDE 0472-813, IEC 60754-2: pH≥4.3, specific conductivity: ≤100µScm-1.
• Function retention in fire conditions: cable with DIN VDE 4102-12 fastening system – 90 minutes, insulation IEC 60331, DIN VDE 0472-814, fire resistance for 180 minutes. Maximum core temperature during short circuit: +250°C.
• Rated voltage: 0.66/1 kV.
• The bending radius is at least seven times the minimum external cable size.
• Material:
- insulation: organosilicone (silicone) rubber;
- sheath: halogen-free polymer compound;
- core: copper conductor.
• Temperature range during installation and laying: from -10 to +50°C; operating temperatures with fixed connection from -40 to +70°C.
• Cable service life – at least 12 years.

Characteristics:
• Device type Fire-resistant cable
• Weight 0.25 kg
• Cable type Power
• LSZH sheath (low-loss halogen-free compound)
• Cable resistance 12.1 Ohm
• Number of cores 3
• Conductor material Copper (Cu)
• Core cross-section 1.5 mm²
• Color Orange