Fire-resistant power cable TCF(N)HXH FE180/E30 3x1.5 0.66/1kV

Halogen-free power cable with special fire resistance characteristics (N)HXH FE180/E30 3x1.5 0.66/1kV - consists of 3 conductive copper conductors with a cross-section of 1.5 mm². It is a non-combustible/non-supportive cable with silicone rubber insulation and a sheath made of halogen-free polymer compound, with the cable functioning in conditions of fire exposure for 30 minutes.

Application.
The cable is used for permanent installation above and below plaster in dry, damp and wet rooms, as well as in masonry, walls and concrete. It is allowed to lay the cable in the ground, but only if it is laid in protective hoses and pipes. Suitable for power networks with a rated voltage of up to 0.66/1 kV.

Features
- Conforms to the following standards: fire resistance DIN VDE 0472-804C, 0482-266-2-4, IEC 60332-3; smoke emission DIN VDE 0472-816, 0482-267-2-4, IEC 61034; emission of toxic and corrosive gases during combustion: IEC 60754-1, acid gases < 0.5% DIN VDE 0472-813, IEC 60754-2: pH≥4.3, specific conductivity: ≤100µScm-1.
- Preservation of function in fire conditions: cable with DIN VDE 4102-12 fastening system - 30 minutes, insulation IEC 60331, DIN VDE 0472-814, fire resistance for 180 minutes. Maximum core temperature in case of short circuit: +250°C.
- Rated voltage: 0.66/1 kV.
- The bending radius is at least seven times the minimum outer size of the cable.
- Material:
- insulation: silicone rubber;
- sheath: halogen-free polymer compound;
- core: copper conductor.
- Temperature range during installation and laying: -10 to +50°C; operating temperatures at fixed connection: -30 to +50°C.
- Cable service life: at least 12 years.

Specifications:
- Device type Fire-resistant cable
- Cable resistance 12.1 Ohm
- Warranty period 12 months
- Cable type Power cable
- LSZH sheath (halogen-free compound)
- Number of conductors 3
- Core material Copper (Cu)
- Cross-section of the core 1.5 mm²
- Color Orange