ITV U-Prox mini MF Reader in a plastic case for Mifare identifiers

The reader in a plastic case U-Prox mini MF is used in access control and management systems (ACS). Reading Mifare ISO14443A 13.56 MHz identifiers (Mifare Standart, Mifare Ultralight, Mifare Classic 1K, Mifare Classic 4K, Mifare Classic 7UID, Mifare DESFire), reading BLE identifiers (Bluetooth low energy). Programmable interface type: RS-232, Wiegand 26 bits, Wiegand 37 bits, Wiegand 42 bits, standard Wiegand with automatic selection and TouchMemory. Reading range 16-20 cm. Two covers included (gray, black). Possibility of organizing closed and protected card reader systems (anti-cloning).

Types of identifiers (cards, key fobs) used:
U-prox MF readers work with Mifare and BLE identifiers.

Discontinued.

Replacement for U-Prox SL mini.

Construction
The reader is installed in a miniature plastic housing with its subsequent sealing. Due to its small overall dimensions, the reader has increased strength and reliability.

U-Prox series proximity card readers support multi-standard output interfaces and various card formats. U-Prox mini MF supports Mifare ISO14443A technology.
MF modification readers support a mode in which they read the code of only those identifiers that have data sector encryption encrypted with a known encryption key.

In addition, the U-Prox mini MF reader provides the ability to prepare such identifiers - encryption of data sectors ("card issuance"). In this case, all open sectors on the card will be encrypted to make it impossible to attack with code selection based on known passwords.

The reader also supports BLE (Bluetooth low energy) technology - it can use a mobile phone as an identifier.

Modern style, patented indicator design, optimal ratio of size and functionality - this is the U-Prox mini reader.

Characteristics:

Mifare ISO14443A contactless reader:
• Mifare® Standard,
• Mifare® Ultralight,
• Mifare® Classic 1K,
• Mifare® Classic 4K,
• Mifare® Classic 7UID, Mifare® DESFire
• Reading range – up to 50 mm

Output interfaces:
• Wiegand 26 bit,
• Wiegand 32 bit,
• Wiegand 34 bit,
• Wiegand 37 bit,
• Wiegand 40 bit,
• Wiegand 42 bit,
• RS-232,
• TouchMemory

Corps
• Material ABS plastic
• Color black, gray
• Body material: ABS plastic

General
• Supply voltage +9…+16 V
• Maximum permissible range of supply voltage ripples – up to 500mV
• Working temperature: -35°C. . . +60 C
• Dimensions: 80 mm x 45 mm x 12.5 mm
• Humidity 100% (no condensation)
• Weight: 70 g
• Easy installation
• Card personalization — reading and writing (card issuance)

Reading distance
The reader provides reading of the contactless identifier code at a distance of 50 to 100 mm (depending on the type of operating conditions). At a supply voltage of +13.5 and a ripple amplitude of no more than 50 mV, the standard reading distance for Mifare 1K standart identifiers, when raised parallel to the body plane, is 80 ... 90 mm.