Board ATES0013 redundant uninterruptible power supply 10.8 (11.2V)...13.75V 1.5A. Battery charge monitoring, battery deep discharge protection, mains monitoring, short circuit protection, operates from 20-24 V DC or 18-22 V AC (mains power requires a 20-24 V DC power supply or a 220/18- 22B).
Discontinued.
Possible replacements: repair of the existing one or installation of an uninterruptible power supply unit.
Characteristics:
• Input voltage 20-24 V DC or from 18-22 V AC
• Output voltage 10.8 (11.2) ... 13.75 V
• Maximum load current (with a charged battery and 220 V network voltage) 3.0 A;
• Nominal load current (with fully discharged battery and 187 V mains voltage) 1.5 A (2.0) A;
• The voltage at which the output is triggered, the battery is discharged is 11.0 V
• Cut-off voltage (battery protection against deep discharge) 10.5 V
• Checking the condition of the fuses
• Logical information outputs:
- Availability of power supply voltage
- presence and serviceability of the battery
• Outputs for connecting LED indicators:
- Availability of power supply voltage
- presence and serviceability of the battery
- The presence of voltage on the load
It is used as a power source in the NDC-F18PS and NDC-F18IP (U-Prox IP400) controllers.
