IP camera Hikvision DS-2CD1023G0-IU (4 mm) 2MP outdoor with microphone

IP camera Hikvision DS-2CD1023G0-IU (4 mm) for video surveillance systems 2 MP outdoor with microphone. Camera: Matrix: 1/2.8 inches Progressive Scan CMOS; Compression: H.264 / H.265 / H.264 + / H.265 + / MJPEG; Lens: f = 4 mm (viewing angle 86 °); Sensitivity: 0.01 Lux/(F1.2, AGC on), 0.028 Lux/(F2.0, AGC on); Recording: 1920 x 1080, 1280 x 960, 1280 x 720 - 25 fps; Audio - built-in microphone; Functions: DWDR, 3D DNR, BLC, day/night (ICR); IR illumination up to 30 m. IP67; TVS 2000; DC 12V±25%/5W, PoE (802.3af); F 70 x 172.7 mm, 280 g.

The 2-megapixel IP camera with infrared illumination from Hikvision is a great choice for organizing video surveillance of a private home, office or enterprise. It allows you to monitor the perimeter outside the premises, and installation will not cause any difficulties.

The camera is made in the Bullet form factor, the body material is metal, and the rear mount is plastic. External interfaces are presented in the form of a pigtail with two female connectors: DC 12V power supply and RJ45 network interface with PoE support.

One of the main advantages of the camera is its budget price, but despite this, the camera is equipped with a 1/2.8" sensor with a maximum resolution of 1080p and a recording speed of 25 frames/s. A built-in microphone and day/night mode with an IR illumination range of up to 30 m. Video compression technology based on the H.265 codec will help significantly reduce the load on the local network and save space on the hard drive.

I would like to note some advantages of the device - operation at temperatures from -30 ° C to +60 ° C, the degree of protection meets the IP66 standard, convenient adjustment in 3 planes, a built-in microphone for sound recording, the ability to remotely view what is happening and receive PUSH notifications about alarms to your smartphone using the Hik-connect application.

Features:
• Support for the HIKSSL cryptographic module, certified to comply with the FIPS140-2 standard
• 1/2.8 inch Progressive Scan CMOS
• H.265+, H.265, H.264+, H.264
• 1920x1080 – 25 frames per second
• Fixed lens 4 mm
• DWDR/3D-DNR/ROI
• IR illumination up to 30 m
• 3-axis adjustment
• IP66
• Built-in microphone

Characteristics:
• 1/2.8 inch progressive Scan CMOS sensor
• Max. resolution 1920x1080
• Min. sensitivity 0.028 Lux/F2.0, 0 Lux with IR illumination
• Shutter speed 1/3 – 1/100,000s
• Slow shutter speed Supported
• Day/night mode Day / Night / Auto / Schedule
• Axis adjustment Pan: 0° 360°; Tilt: 0° 180°; Rotation: 0° 360°
• Type of illumination IR
• Illumination range 30 m
• Lens type Fixed
• Focal length 4 mm
• M12 lens mount
• Aperture F2.0
• Viewing angles H: 86°; V: 46°; L: 102°
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• Number of threads 2 threads
• Supports resolutions 2MP (1920x1080), 1.3MP (1280x960), 1MP (1280x720), D1 (704x576), VGA (640x480), CIF (352x288)
• Frame rate (main stream) 1080p – 25fps, 720p – 25fps
• Frame rate (additional stream) D1 – 25fps, VGA – 25fps, CIF – 25fps
• Video bitrate 32 Kbps – 8 Mbps
• Gain Control (AGC) Supported
• Noise Reduction (DNR) 3D-DNR
• BLC Supported
• DWDR Supported
• ROI 1 fixed area for main stream and substream
• Image settings Rotation mode, saturation, brightness, contrast, sharpness are adjustable by client software or web browser
• Audio compression G.711/G.722.1/G.726/MP2L2/PCM
• Audio bitrate 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-192Kbps(MP2L2)
• Ethernet 1x RJ45
• Network protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, RTP, RTSP, RTCP, NTP, IGMP, QoS, UDP
• ONVIF (PROFILE S, PROFILE G), ISAPI, SDK compatibility
• Audio interfaces 1 input (built-in microphone), mono sound
• Reset button Reset via web browser and client software
• Alarm triggers Motion detection, scene change, illegal access
• Action when trigger is triggered Upload to FTP, notification to monitoring center, sending email
• Power supply DC 12V ±25%
• PoE PoE (802.3af) (Class 3)
• Power DC 12V: 0.3A, 3.6W; PoE: (802.3af, 36-57V), 0.2A - 0.1A, max. 4W
• Operating temperature -30°C - +60°C
• Humidity <95%
• Protection degree IP66
• Dimensions 67x66x177 mm
• Weight 270 g
• Material Metal+Plastic