Hybrid single-phase inverter Deye SUN-6K-SG05LP1-EU 6kW, 1ph, for 48V battery

The Deye SUN-6K-SG05LP1-EU 6 kW hybrid single-phase inverter is a versatile solution for solar power plants. It allows you to integrate solar panels, batteries (48V) and the grid, optimizing energy consumption and providing backup power. This inverter is ideal for private homes that strive for energy independence and reliable power supply.

Hybrid single-phase inverter with a nominal power of 6 kW, with 2 built-in MPPT controllers and a built-in charger; maximum power 6 kW; maximum short-term power (peak) 12 kW; battery voltage 48 V; maximum charge/discharge current 120/120 A; output voltage 230 V, output frequency 50/60 Hz; efficiency 97.6%; voltage range from solar panels 100-500 V, maximum solar panel power 7.8 kW; battery switching time 8 ms; CAN / RS485 communication interfaces; wall mounting; protection class IP65; ambient temperature -25°C + 60°C; dimensions 680 / 420 / 233 mm, weight 32 kg.

Features:
• Work with the external grid: The inverter supports the mode of selling surpluses at the "green" tariff, directing energy to its own needs, charging the battery and to the grid. It can also work to compensate for its own consumption, preventing the flow of excess energy to the external grid.
• Battery operation: Compatible with lead-acid and lithium batteries. If there is a CAN/RS485 port, the inverter receives battery data (capacity, charge, temperature); without a port, the parameters are set manually. Allows you to adjust the discharge current, charge sources and daily modes.
• Auxiliary power port: A multi-function port that can be input or output, with three usage options:
• Generator mode: Connection and automatic control of the generator (requires a generator with automation). Ability to adjust the generator's power and operating/rest time, as well as the battery charging current from it.
• Smart Load Mode: Converts input to output, directing excess energy to an external load (e.g., water heater).
• Micro-inverter mode: Allows you to connect additional solar fields via a grid or micro-inverter when solar energy is insufficient.
• Solar panel operation: Possibility of connecting two solar fields (up to 13 A each). MPPT range: 125-425 V, start at 150 V, upper field voltage limit: 500 V. Recommended nominal MPPT voltage: 370 V. Maximum total power: 7800 W (up to 4000 W per MPPT on modern panels).
• Service functions and features:
• LCD display with touch control for settings and configuration.
• Included WiFi module for connection to the SOLARMAN cloud monitoring service (graphs, generation statistics).
• IP65 protection rating allows outdoor installation.
• Forced cooling by three electronically controlled coolers.


Characteristics:
• Solar trackers
- Maximum DC input voltage, V: 500
- Nominal DC input voltage, V: 370
- Number of trackers: 2
- Maximum tracker input current, A: 18
- Maximum power of photovoltaic modules, kW: no data
• Output power
- Maximum AC output power, kW: 6.6
- Nominal output voltage AC, V: 220/230
- AC output voltage range, V: 220-230
- Maximum output current, A: 30
- AC output frequency, Hz: 50/60
• Charger
- Battery voltage, V: 40-60
- Charging current from photovoltaic modules, A: no data
- Charging current from the network, A: none
- Maximum charging current, A: 135
• Type
- Inverter type: hybrid
- Controller type: MPPT
• General data
- Number of phases: 1
- Output voltage form: no data
- Efficiency not less than, %: 96.5
- Operating temperature range: -40 C° - +60° C
- Noise level: no more than 30 dB
- Cooling type: forced
- Control interface: RS485/Wi-Fi
• Protection
- Protection level: IP65
• Physical characteristics
- Size, mm: 680x420x233
- Weight, kg: 32