Optical patch cord Cor-X OFPC-SC/UPC-SC/UPC-3 SC/UPC - SC/UPC, 3 mm, length 3 m

Optical patch cord OFPC-SC/UPC-SC/UPC-3 SC/UPC - SC/UPC, 3 mm, length 3 m, designed for connecting media converters, SFP modules and other optical devices when transmitting data over the network.

A patch cord is a simplex or duplex piece of cable of a given length and outer diameter, terminated on both sides with SC connectors.

Advantages:
• Small losses incurred;
• Low reflection;
• Good reproducibility;
• Good interchangeability;
• High temperature stability.

Color coding
The color of the connector indicates the method of polishing the end:
• black - PC polishing type
• blue - polishing type UPC (Ultra PC)
• green - polishing type APC (Angle PC)
• beige - used in patch cords with multimode fiber

The color of the patch cord indicates the type of optical fiber used:
• yellow - single-mode fiber
• orange - multimode fiber

Areas of use:
• Fiber optic communication systems;
• Fiber optic data transmission systems;
• Fiber optic access networks;
• Fiber optic CATV networks;
• Local area networks;
• Test tools;
• Fiber optic sensors.

Characteristics:
• SC/UPC type
• Patch cord length, m 3
• Insertion loss, dB ≤0.30
• Maximum insertion loss, dB ≤0.30
• Reproducibility *, dB ≤0.10
• Interchangeability *, dB ≤0.20
• Back reflection, dB ≤-50
• Fiber type and diameter *** Corning SMF-28, 9/125μm
• Operating temperature, °C - 40 ÷ +70
• Storage temperature, °C - 40 ÷ +85
• Durability over 1000 times
• Telcordia GR-326 standard
* - the term reproducibility refers to the spread of introduced losses for the same instance of the product.
** - the term substitutability means the spread of losses incurred for different instances of products of the same type.
*** - upon request, it is possible to manufacture a patch cord with single-mode fiber, insensitive to bends (ITU-T G.657.A), as well as with multimode fiber 50/125 μm (OM3, OM4).