Fiber optic cable FinMark UT024-SM-15 LSZH single-mode dielectric in a sheath made of low-smoke, halogen-free, non-flammable plastic, for suspension or laying in pipes.
Cable of 24 single-mode fibers, monotube, reinforcing sklinits, PE sheath, diameter 6.3 mm, 1 kN, 46 kg/km. Optical fiber that meets the requirements of ITU-T G.652.D.
The price is for 1 km of cable, shipped in sections of any length upon prepayment.
Min. a segment of 200 m.
Features:
• High mechanical tensile strength
• Low weight
• The sheath made of low-smoke halogen-free plastic (LSZH) does not spread combustion and allows the cable to be used in indoor wiring.
• A sufficiently large supply of fibers in the cable allows it to withstand without damage critical tensile forces at extreme temperatures, wind loads or icing
• Absence of guidance on power elements during suspension on the supports of high-voltage networks
• Absence of induced currents on power elements during lightning discharges
• Small diameter and round cross-section reduces sailability under wind load
• Aramid rods embedded in the shell provide additional resistance to tensile forces. At the same time, the weight does not increase, the flexibility of the cable is not lost due to their small size and weight
• Aramid rods are embedded in the shell, and with additional stretching, the force from the clamp is transmitted to the power elements, which deforms the shell less
• Moisture-proof fibers ensure the protection of the cable core from lateral penetration of moisture.
• Reinforcing glass fibers provide additional protection against tensile forces.
• Reinforcing glass fibers are made in the form of strands, not loose fibers, which is more convenient and safer during installation.
Construction:
A cable with a central optical module that can accommodate up to 24 optical fibers. A layer of reinforcing glass fibers is located on top of the modular tube. The shell is made of UV-stabilized high-density polyethylene. To increase resistance to tensile loads, two aramid-plastic power elements are built into the shell.
The fully dielectric design of the cable excludes any electromagnetic influences on the cable, eliminating the need to address issues of grounding and electrical safety during installation and operation.
Characteristics:
• Number of fibers, approx. 24
• Diameter of the optical module, mm 2.8
• Thickness of the outer shell, mm 1.4
• Diameter of aramid rods, mm 0.5
• Fiberglass reinforcing material
• Cable diameter, mm 6.3
• Cable weight, kg/km 46
• Min. bending radius, constant/dynamic 10/20 cable diameters
• Max. tensile load, H 1000
• Max. compressive load, N/100mm 500
• Max. overhang length, m 80
• Permissible operating temperatures, °C -20 - +70
storage -30 - +70
installations -10 - +50
