FinMark FTTH002-SM-02 optical cable is particularly light for laying optics in the house, size 2x3 mm, LSZH sheath, 2 single-mode fibers, two steel reinforcing wires in bays of 1000 m.
It is shipped in bays of 1000 m-code.
Appointment:
FinMark FTTHxxx-SM-02 "last mile" optical distribution cable for use in FTTH networks. It is intended for laying inside buildings, in risers, attics, basements, pipelines, in boxes and on plinths, in offices and apartments. Easily attached to any flat surfaces, simple and convenient in processing and installation.
Construction:
The cable contains one, two or four optical fibers conforming to the G.652.D recommendation (standard single-mode fiber with suppressed "water peak"). The outer shell is made of halogen-free low smoke material that does not spread combustion — LSZH (Low Smoke Zero Halogen). Resistance to longitudinal tension of the cable is provided by two power elements made of steel wires.
Characteristics
• Cable type (number of fibers) 2
• Fiber type (according to ITU-T) G.652.D
• The material of the power elements is steel wire
• Diameter of power elements, mm 0.45
• LSZH cable sheath material
• Cable dimensions: thickness × height, mm * 2.0 × 3.0
• Cable mass, kg/km ** 10
• Min. constant/dynamic bending radius, mm
30/60
• Max. tensile load (short-term), H 200
• Max. compression load (short-term), N/100 mm 2200
• Permissible operating temperature, °C -40 ... +60
(*) - permissible deviation of +/- 0.1 mm
(**) - nominal value
