Uninterruptible power supply unit (pulse) Faraday 85W UPS Smart ASCH ALU 12V (14.1V) 5A 85W without box, perforated aluminum case, 1-channel. Output: +14.1V/5A terminal block; input: AC 86-264V, DC 110-380V, terminal block; voltage stabilization; deep discharge protection. Battery connection 9Ah, 12Ah, 18Ah, 20Ah. Mounting on a DIN rail is possible. Dimensions: 133x74x37 mm.
Features
• processor management of battery protection and charge
• serial port, 4 information outputs
• thermal stabilization of charge voltage
• desulfation of battery plates
• starting the power supply unit without a 220V network from the battery
• 100% automatic protection of the battery output and circuit
• control of the presence of a connected battery
• no dips in the output voltage during switching
• remote battery charge/discharge control
• indication of operation by 3 LEDs
• the possibility of mounting on a DIN rail
Characteristics:
• Entrance
- nominal output power: 85W
- output voltage (from the network): 14.1V
- output voltage (from battery): 10.5-13.8V
- battery charge voltage: 13.8V
- battery cut-off voltage: 10.4-10.6V
- battery cut-off current (without mains): 6.5A
- output current per load: 5A
- battery charge current: 0.9A
- recommended battery capacity: 9-20Ah
- support current of a charged battery: 20-100mA depending on the type of battery
- idle current from the battery: 60mA
- noise and pulsations (from the mains): 30mV
- Primary source efficiency: 87%
• Exit
- input voltage range: AC 86-264V, DC 110-380V
- input current frequency: 47-63 Hz
- idle power: ≤0.8W
• Time to failure: 150,000 hours
• Operating temperature: from -25°C to +70°C
• Body: aluminum, perforated
• Dimensions: 133x74x37mm
• Complete set of power supply unit, battery connection cable, battery temperature sensor
• Light indication
• Connecting the input terminal block
• Connection output terminal block
• Output current, A 6
• Number of load channels 1