Uninterruptible power supply unit Faraday 20W UPS Smart ASCH ALU 14.1V 1A without box pulse, 1-channel. Power 20W. Output: +14.1V/1A terminal block; input: AC 86-264V, DC 110-380V, terminal block; aluminum perforated case; voltage stabilization; deep discharge protection. Connecting a 4Ah battery. Mounting on a DIN rail is possible. Dimensions: 84x53x25 mm.
Features:
• processor management of battery protection and charge
• serial port, 4 information outputs
• thermal stabilization of charge voltage
• desulfation of battery plates
• starting the power supply unit without a 220V network from the battery
• 100% automatic protection of the battery output and circuit
• control of the presence of a connected battery
• no dips in the output voltage during switching
• remote battery charge/discharge control
• indication of operation by 3 LEDs
• the possibility of mounting on a DIN rail
Characteristics:
• The type of power supply unit is pulsed
• Entrance
- nominal output power: 20W
- output voltage (from the network): 14.1V
- output voltage (from battery): 10.5-13.8V
- battery charge voltage: 13.8V
- battery cut-off voltage: 10.4-10.6V
- battery cut-off current (without mains): 1.8A
- output current per load: 1A
- battery charge current: 0.2A
- recommended battery capacity: 4A/g
- support current of a charged battery: 20-100mA depending on the type of battery
- idle current from the battery: 30mA
- noise and pulsations (from the mains): 10mV
- Primary source efficiency: 84%
• Exit
- input voltage range: AC 86-264V, DC 110-380V
- input current frequency: 47-63 Hz
- idle power: ≤0.3W
• Time to failure: 150,000 hours
• Operating temperature: from -25°C to +70°C
• Body: aluminum, perforated
• Dimensions: 84x53x25mm
• Complete set of power supply unit, battery connection cable, battery temperature sensor
