Radio button Elmes Electronic AN200HS for 200 meters

Name: Radio button Elmes Electronic AN200HS for 200 meters
Brand: Elmes Electronic
SKU: 03241
Price: 1440 UAH
Availability: OutOfStock

Brand: Elmes Electronic

Product Code: 03241

Reviews: (0)

Out Of Stock

1 440.00грн.

Price with VAT: 1 440.00грн.

Fast delivery Nova Post across Ukraine; Free shipping from UAH 2,000; Pickup Simple payment Payment on account - for individuals; Non-cash payment wit VAT - for companies Warranty Warranty for purchased goods Exchange and return Exchange and return of goods within 14 days

The Elmes Electronic AN200HS radio control controller is single-channel for 200 meters (with direct line of sight), consists of a radio receiver and an AN-200HT transmitter key fob. The kit is used in OPS and LCD systems, allows simultaneous operation with 12 AN-200HT key fobs. External power supply 12VDC, 1 relay (125VAC/0.5A 30VDC/1A), frequency 433.92 MHz.

The AN-200-HS 200 meter radio button uses MICROCHIP's proprietary KEELOQ signal encoding algorithm. Each code transmitted on the air is unique, as a result of which radio scanning and capture of the code does not allow illegal control of the receiver.

The radio button provides a high level of protection for decoding keys and code combinations that are programmable but cannot be read. The keys can only be checked by the receiver's decoder after the programming operation. The number of transmitters that can be used in one standard set is limited to 12. In case of loss of one or more transmitters and the need to exclude them from the system, it is possible to completely clear the memory and further teach the decoder to the codes of the remaining transmitters.

The receiver has a relay output with "dry" switching contacts (NO/NC). This output can be programmed to operate as a trigger or with a set hold time. In addition, there are so-called signal output S (open collector, 50 mA), which, if the relay output is programmed as a trigger, gives two short pulses when the relay is activated and one pulse when released. An external siren can be connected to this output (via an additional relay) for audible confirmation of the system's response. The receiver has a built-in two-color LED, which provides the necessary indication of the receiver's status and programming mode.

Kits come ready to install with transmitter codes programmed and batteries installed. The relay output is programmed to operate with a hold for a short time. Changing the hold time or relay operation mode, as well as teaching the decoder new transmitter codes, requires programming as described in the attached manual.

Characteristics:

Transmitter:

• The number of channels is 1

• Radio frequency – 433.92 MHz

• Encoding type – KEELOQ

• Transmitter output power – 5 mW

• Range of action – 200 m

• a transmitter compatible with the EU 433.92 MHz standard;

• Transmitter battery voltage - 9 V

• external dimensions: (L/W/D) 113x33x21 mm.

Receiver:

• The number of channels is 1

• regenerative (AN200HR) or superheterodyne (AN200HRhet) receiver;

• power supply 12VDC ±15%, current consumption 20 mA in standby mode or 20 mA when the relay is activated;

• one NO/NC output for 60 VA (128 B/1A);

• Setting the relay holding time from 0.5 sec. up to 4 hours;

• TAMPER protection against hacking with terminals;

• operating temperature range: from 0 to +40C (from -20 to +40C for AN200HRhet);

• external dimensions: (L/W/D) 96x63x28 mm.

Product type

Radio controller kit

Warranty period

12 months

Length

11.30cm

Width

6.30cm

Height

2.80cm

Weight

0.30kg

Reviews

0/ 5

average product rating

There are no reviews for this product. Be the first to leave your review.