UPS with correct sine wave 12V LPY-B-PSW-800VA+(560W) 5A/15A for 12V battery.
Uninterruptible power supplies (UPS) with the correct sine wave ensure autonomous operation of electrical equipment from the battery in the event of a power outage from the mains.
The form of the output voltage in the form of a regular (pure) sinusoid allows the use of UPS of this type for electrical equipment:
• with transformer power supply units
• with three-dimensional induction coils
• with throttle
• with APFC (active power factor correction) power supplies, etc
Characteristics:
• The type is linear-interactive with a regular sine wave
• Number of phases 1
• Power, VA/W 800/560
• The shape of the output voltage is a regular sinusoid
• Input voltage range, V 140-275
• Output voltage, V 220±10%
• Nominal battery voltage, V 12
• Frequency range, Hz 50/60
• Switching time, ms 4-6
• Charge current from the mains, A 5/15
• Number of outputs 2
• LCD display type
• Type of connection to the Europlug network
• The type of connection of the load to the UPS Eurosocket
• Type of connection of the battery to the UPS terminal
• AVR voltage stabilization function is
• Protection against short circuit, voltage surges, overload, discharge, overcharge of batteries
• Operating temperature, °C 0 ~ +40
• Body material is metal
• Installation of the floor
• The color is black
• Length, mm 340
• Width, mm 145
• Height, mm 220
• Warranty, month 24
• Weight, kg 6
• Volume, cubic meters 0.02214
The LPY-B-PSW-800VA+ (560W) 5A/15A uninterruptible power supply has a built-in voltage stabilization function in the range from 140-275 V at the input to 220±10% at the output.
3 steps to connect UPS:
• Connect the battery observing the polarity;
• Connect the UPS to the network by inserting the plug from the UPS into a 220V outlet;
• Wait for self-diagnosis to end and the UPS to turn on.
WARNING! The UPS will turn on automatically! It is forbidden to press the power button and interrupt the self-diagnosis!
A UPS with the correct sine wave and an external battery is used:
as uninterruptible power supplies for gas or solid fuel heating boilers UPS for emergency lighting to provide backup power for server stations and telecommunications equipment, thanks to the function of fast (hot) battery replacement UPS with pure sine wave for circulation pumps as a voltage stabilizer with a backup power source for powerful and high-speed computers
How to choose a UPS for heating boilers and emergency lighting systems?
Before buying a UPS with a correct (pure) sine wave, you must consider the following technical characteristics:
• Total power of electrical appliances that will be connected to the UPS. The parameter can be found in the technical documentation of each of the equipment units.
• Starting power - the amount of electricity that the device consumes when it is turned on. To connect the UPS to equipment with high starting currents, it is necessary to choose a more powerful uninterruptible power supply model.
• Necessary time for autonomous operation from the battery. It is determined from the individual needs of the consumer. For long-term autonomous operation, you should choose a UPS with a pure sine wave output, to which you can connect an external battery.
The LPY-B-PSW-800VA+ (560W) 5A/15A correct sine wave UPS has a capacity of 800VA/560W.
Types of external storage batteries that can be connected to the UPS:
• Lead-acid AGM. Work resource - up to 400 charge/discharge cycles
• AGM (multigel). Work resource - up to 800 charge/discharge cycles
• Gel battery. Work resource - up to 1200 charge/discharge cycles
• Lithium iron phosphate battery. Work resource up to 7000 charge/discharge cycles - only batteries with the note "for UPS"
If it is necessary to extend the cables connecting the battery to the UPS, contact technical support for consultation.
