Ajax MotionProtect white wireless motion detector, signal transmission range up to 2000 m in open space. In real conditions, there are several floors of a business center. Frequency 868-868.6 MHz. 2-way communication. Alarm polling period: 10 - 300 seconds. Adaptive adjustment of transmission power - the closer the detector is to the central unit, the less energy it consumes. Message encryption and channel hacking protection. Authentication. Breakaway tamper protection. Installation on a smart mount. Lithium battery with a capacity of 1200 mAh. The detector has adjustable sensitivity and is able to ignore animals weighing up to 20 kg and up to 50 cm tall.
10% discount on the specified price when ordering.
The principle of operation of the detector is based on the detection of infrared (IR) radiation from a living being. Every living being, including man, is a source of infrared radiation. As soon as the detector notices such radiation, it analyzes the mass of the living object, and if it exceeds 20 kg, it sends an alarm signal to the central unit of the security alarm via radio channel. A special algorithm for processing the incoming signal provides an additional check of the object regarding mass and the presence of movement, to minimize false alarms from moving pets. Thus, the detector is triggered only when human movement is detected. Also, the detector does not respond to the movement of inanimate objects. If in the room, for example, a jacket falls from the hanger, or a draft opens the interior door, the alarm will not work.
The detector is equipped with an effective wireless radio communication system that uses message encryption and protection against signal hacking. This provides excellent alarm security against hacking attempts by intruders. In addition, the detector has an ultra-modern highly reliable communication system, which allows it to work successfully within several floors of a business center or at a distance of up to 2000 m-code in an open area from the central signaling unit.
The detector is fully compatible with all leading control centers using the Ajax ocBridge Plus radio detector receiver, as well as with the Lun control panel version 11 mod.3 and mod.4 and the Lun-19 control panel through the Ajax uartBridge interface receiver. Now you can connect up to 45 wireless devices of the second generation of Ajax. For previously purchased PPK "Lun" version 11 mod.2, to support the Ajax line, you need to update the firmware of the PPK to version 57 and higher, and the Lind keyboard to version 36 and higher.
This wireless motion detector can be used to protect any objects: apartments, private houses, cottages, offices, shops, warehouses, industrial premises, etc. The advantage of this detector is its convenient and extremely easy self-installation with the help of a smart attachment, for installation it is not necessary to disassemble the detector itself. Considering that the motion detector is one of the most common elements of security alarms, this is an important plus for the device.
Features:
• The detector is easy to install and configure without special knowledge
• Installation of the detector using smart fasteners is convenient and will not damage the repair
• The detector regularly transmits test signals to the central unit, and the polling period of the detectors can be adjusted at your discretion. If the detector is attempted to be stolen or hacked, the central security system will immediately find out about it and issue an alarm.
• For reliable monitoring of alarm operation, the detector regularly transmits a battery discharge signal to the central unit, the user will be notified in time of the need to replace the battery in the detector
• The information transmitted by the notifier is protected against interception and attempted substitution.
• The maximum distance between the detector and the central unit is 2000 m in direct line of sight
• The detector uses a general purpose frequency of 868 MHz for signal transmission, which does not require a license to use
• The detector detects movement at a distance of up to 12 m, the horizontal viewing angle is 88.5°
• Ignores pets weighing up to 20 kg, height up to 50 cm
• The detector is not triggered by random movements of inanimate objects
• The sensitivity of the detector is adjustable. You can choose the optimal sensitivity of the detector based on the size of the pet that will be in the room
• Adaptive adjustment of the transmission power, depending on the distance to the central unit, allows you to use less battery power
• Digital temperature compensation ensures high sensitivity of the detector even at room temperature close to human body temperature
• The body of the detector is protected against tampering
• Thanks to a special energy-saving algorithm, the detector works on a CR123A battery for up to 7 years.
• The detector works with the Ajax ocBridge wireless signal receiver
Features:
• Generation The second generation of Ajax
• Wireless alarm type
• The type of motion sensor is a pyroelectric sensor
• Range of motion detection is 12 m
• Horizontal motion detection angle of 88.5 °
• Vertical motion detection angle of 80 °
• Immunity from pets up to 20 kg
• Type of fastening mounting on the wall
• The installation height is 2.4 m
• Tamper protection is available
• The range of the wireless signal is 2000 m
• Transmission frequency of 868 or 915 MHz depending on the country of sale
• The power of the radio transmitter of the detectors is 20 mW
• Battery type CR123A
• The life of the detector from one power cell is up to 7 years
• Operating voltage 3 V
• Operating temperature range 0⁰C – + 50⁰C
• Working humidity up to 80%
• Dimensions 110x65x50 mm
Complete set
• Ajax MotionProtect wireless motion sensor white
• Installation and operation manual
• Battery type CR123A